Renx Homes News Canada (RENXHOMES)
c/o Squall Inc.
1101-945 Princess Street
Kingston, Ontario K7L 0E9

Ontario is simply not building enough homes

At a time when Ontario’s residential construction industry needs to find a way to build more housing at lower prices, three new cost pressures are pushing it in precisely the opposite direction.

Tariffs and counter-tariffs are raising the price of construction materials. Diesel prices have surged, increasing the cost of operating machinery and moving virtually everything that arrives at a jobsite.

And now Stelco has indefinitely idled its cold-rolled and galvanized steel operations in Hamilton, tightening domestic supply of a product essential to residential construction. 

Cleveland-Cliffs, Stelco’s U.S. parent, began idling the Hamilton operations in October, with hundreds of jobs affected.

Individually, each challenge would be concerning. Together, they amount to another serious affordability problem for an industry already under enormous pressure.

Ontario is simply not building enough homes.

Province falls well short of target

The province’s target was 150,000 new homes in 2025. Even using an expanded definition that includes basement and laneway suites, long-term-care beds, retirement-home suites and student housing, Ontario achieved only 86,760, or 58 per cent of the target.

Actual housing starts accounted for just 65,476 of that total, according to figures prepared by Global News. 

That means Ontario missed its 2025 target by 63,240 homes, even under the broader counting methodology.

The GTA’s highrise market is flashing an equally bright warning light.

Only 129 new highrise units were sold in September, the lowest September on record. Sales were down 40 per cent from September 2025 and an astonishing 90 per cent below the 10-year average. Overall new-home sales, however, remained 52 per cent below the 10-year average.

When projects cannot achieve sufficient sales, they do not proceed. Adding thousands of dollars in new construction costs makes that equation even more difficult.

The rising cost environment

Tariffs on products used in the construction of new housing are perhaps the most obvious problem.

The tariff war is hitting precisely the products builders need: structural steel, rebar, pipe, fasteners, lumber and engineered wood, HVAC equipment, elevators, electrical components and appliances.

RESCON estimates the Sept. 8 tariff measures alone will add roughly $9,000 to $14,000 to the cost of a typical Ontario single-detached home and $18,000 to $20,000 to a midrise unit, on top of an estimated $15,000 to $25,000 from measures imposed in March 2025.

These aren't luxury upgrades that builders can simply remove. A project needs structural materials, HVAC equipment, electrical products, fasteners and appliances.

Nor can builders indefinitely absorb tens of thousands of dollars in additional costs. Residential projects must ultimately cover the cost of land, labour, materials, financing, municipal fees and construction. When those inputs rise, so does the price of the finished home.

Then there is fuel.

Diesel powers excavators, loaders, generators and trucks. It is also needed to move aggregates, concrete, steel, lumber and virtually every other heavy material used on a construction site.

With diesel around $2.60 a litre nationally in mid-October, the shock is being felt at virtually every stage of construction.

Consider what that means in practice. If the cost of operating an excavator rises, excavation becomes more expensive. If hauling aggregate costs more, concrete and sitework become more expensive. If transporting steel, lumber, insulation and mechanical equipment costs more, those increases eventually find their way into project bids.

The effect is already visible in cement. St. Marys Cement’s fuel surcharge, for example, increased from $1.92 per tonne in January to $7.82 in October, more than four times as much.

The Stelco situation adds another layer.

Galvanized steel is found throughout new residential buildings: steel studs and framing, HVAC ductwork, roofing and flashing, joist hangers, connectors and decking. Reducing domestic production means builders and suppliers may have to compete for scarcer Canadian material or turn increasingly to imports, some of which are themselves caught in the tariff battle.

That combination will lead to higher prices, longer lead times and greater uncertainty, particularly for steel-intensive midrise and highrise projects.

Affordability continues to recede

All of this is occurring in a country where housing affordability already has been badly compromised.

A new CMHC report on international house prices finds that Canada’s inflation-adjusted house prices have more than doubled since 2005, increasing faster than in most developed countries. 

CMHC concludes that housing supply has not kept pace with demand as effectively as in several comparable countries.

That should make the policy objective painfully obvious. Canada simply needs to make housing less expensive to build, not more expensive.

Governments cannot control every geopolitical event or commodity-price shock. But they can recognize when policies, taxes, fees and regulations pile needless additional costs onto an industry already struggling to put shovels in the ground.

Every additional cost ultimately makes another project harder to finance and another home harder to afford.

At a time when we desperately need more supply, we are instead making housing more expensive to build. That is exactly the wrong direction.



Industry Events